This machine was developed in collaboration with a famous luthier who wanted a machine that could sand very short and very thin pieces.

The main features that enable it to process short pieces efficiently are the single drum and the double infeed and double outfeed pressure rollers that are tucked in closer to the drum. The result is that you have continued downward pressure on extremely thin stock as short as 10" (G9962ZX). That is the distance between the first infeed and first outfeed pressure rollers.

The feed belt is made of harder rubber to prevent distortion of thin stock while sanding. The result is that you get perfectly parallel sanding in any thickness of stock.

It includes features like digital read out, powered table elevation, four screw jacks for table support, two feed speeds, disc brake stopping system, dust proof photo-electric eye / pneumatic control for belt oscillation and separate motors for the drum, the feed rollers and the table elevation. CSA certified to CSA C22.2 #71.2-10, CSA C22.2 #105-1953, and UL 987-7th standards!

Features:

• Convenient control panel with separate switches for each motor
• Load sensing system
• Disc Brake system for emergency stops
• Double infeed and outfeed pressure rollers
• Variable feed speeds
• Easy belt change
• Pneumatic sanding belt oscillation control
• Accurate reading vernier thickness scale
• Digital readout accurate to within 0.005"