These machines were developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short & very thin pieces.

The main features that enable it to process short pieces efficiently are the single drum & the double infeed & double outfeed pressure rollers that are tucked in closer to the drum. The result is that you have continuous downward pressure on extremely thin stock as short at 9" (G0445). That is the distance between the first infeed & the first outfeed pressure rollers.

The feed belt is made of harder rubber to prevent distortion of thin stock while sanding. What follows is that you get perfectly parallel sanding in any thickness of stock. Since then, we have introduced a complete range of 24" sanders including the platen model.

All four models include features like digital read out, powered table elevation, four screw jacks for table support, variable speed, disc brake stopping system, dust proof photo electric eye/pneumatic control for belt oscillation & separate motors for the drum, the feed rollers & the table elevation.

Features:

• Convenient control panel with separate switches for each motor
• Amp meter load sensing system
• Disc brake system for emergency stops
• Double infeed and outfeed pressure rollers
• Variable feed speeds
• Fast belt changes (takes less than 30 seconds!)
• Pneumatic sanding belt oscillation control
• Digital readout accurate to within 0.005"
• Type: Platen