This sander features a 6 x 89-inch belt that oscillates 3/4-inch vertically at fifty two times per minute! It also has a quick release belt tension lever, a 0 to 90 degree tilting graphite-coated platen, and a 2 HP motor. The W1730 has a 26-7/8 x 12-inch cast iron main table for edge sanding and a 10 x 11-1/2-inch cast iron auxiliary table for spindle sanding. Three spindle sanding drums, measuring 1-1/2, 2, and 3-inches in diameter are included for sanding smaller curved surfaces. Other features include a 180 degree adjustable miter gauge, two 4-inch dust ports, a powder-coated finish, and a removable fence. Features: * T-Slot table & miter gauge * Two 4-inch dust ports * Quick release belt tension lever * Graphite coated platen * Oscillating sanding belt * Shielded & permanently lubricated ball bearings * Precision ground cast iron tables Specifications: * Motor: 2 HP, 220V, Single-Phase, 1725 RPM, TEFC * Table Size: 26-7/8 x 12-Inches * Table Travel: 3-3/4-Inches Vertical, 5-Inches Horizontal * Aux. Table Size: 10 x 11-1/2-Inches * Aux. Table Travel: 10-Inches * Sanding Belt Size: 6 x 89-Inches * Sanding Belt Speed: 3150 FPM * Sanding Belt Oscillation Stroke: 3/4-Inch * Drive Drum Diameter: 7-Inches * Idler Roller dDiameter: 3-7/8-Inches * Platen with Graphite Pad: 6-3/4 x 30-1/4-Inches * Platen Tilt: 0° through 90° (5° scale) * 3 Spindle Drums: 1-1/2, 2, 3 x 4-1/2-Inches High What's In The Box: * Shop Fox W1730 Oscillating Edge Sander