|Depth at 90|
|Depth at 45|
|Scoring blade diameter|
|Scoring blade arbor|
|Scoring blade speed|
|S.blade tilt left|
|S.blade tilt right|
|Rip to fence|
Klass 30 is SAC entry-level panel saw. Even though it is an economic version, its features allows the machine to compete on every markets. Here below the points of strength:
The scoring unit is equipped with an independent motor with adjustments on the work table
The control panel is inclined towards the operator to ensure practical and ergonomic use
The carriage unit is 181mm high and therefore characterised by high flexural and torsional rigidity.
The carriage is 3200mm long (competitors offer 3000 mm long carriagas for this cost range)
The machine frame is operated on CNC controlled machines in correspondence with the carriage supports to prevent deformation and improve the smoothness and straightness of the cut
The ground cast iron working table measures 970x530.
The motor support unit with dovetail sliding reduces clearance and vibrations
The motor support design has been studied to obtain a more efficient dust extraction
The cross-cut frame is equipped with quick locking to reduce set-up and working times
Blade protusion (d 315mm) 105mm ensures higher cutting possibilities
The carriage is equipped with locking system in any position of the stroke.
No videos found!
Submit a video!
No Reviews Found
Submit a link!
This product has not been reviewed yet.
Let us know what you think.