Klass 35 is a medium range machine with high standard features. Its marketing mix, defined after a careful market research, gives it an advantage on its competitors. This is confirmed by the following points:

The scoring unit is equipped with an independent motor with adjustments outside the machine

The control panel is inclined towards the operator to ensure practical and ergonomic use

The carriage unit is 181 mm high and therefore characterised by high flexural and torsional rigidity.

The machine frame is operated on CNC controlled machines in correspondence with the carriage supports to prevent deformation and improve the smoothness and straightness of the cut

The ground cast iron working table measures 970x530.

The motor support unit with dovetail sliding reduces clearance and vibrations

The motor support design has been studied to obtain a more efficient dust extraction

The cross-cut frame is equipped with quick locking to reduce set-up and working times

Blade protrusion (d 315mm) 105mm ensures higher cutting possibilities

Table extensions are as large as the cast iron surface, ensuring a bigger support and a better cutting quality

The 3 standard rotation speeds allow accurate cutting according to the different materials and their thickness

The carriage is equipped with locking system in any position of the stroke

By equipping the machine with the optional 350mm diameter blade, a protrusion of 120mm is obtained, which allows a higher height of cut.