|Depth at 90|
|Depth at 45|
|Scoring blade diameter|
|Scoring blade arbor|
|Scoring blade speed|
|S.blade tilt left|
|S.blade tilt right|
|Rip to fence|
The all new P12 panelsaws are here, available with four sizes of sliding tables. They cover a wide range:
P12|4 Features compact 51" V-way sliding table design, 3HP main motor and 3/4 HP scoring motor
P12|5 Features 63" dumbbell sliding table design, 5HP main motor, 3/4 HP scoring and swing-away overhead guard
P12|8 Features 102" dumbbell sliding table design with longer body, 5 HP main motor, 3/4 HP scoring and swing-away guard
P12|10 Features 126" dumbbell sliding table design with full body, 5HP main motor, 3/4HP scoring, swing-away guard and overhead control ON/OFF
The P12|4 is designed for the woodworker who requires precision and quality without sacrificing too much shop space. The 51" sliding table is just big enough to cut a 4-ft. panel, even when using the scoring.
Opposing horizontal V-shaped aluminum extrusions traps the steel balls. This design allows the sliding table to cut through dust, chips and other debris almost like scissors with minimal wear and tear.
The European-style 51" rip fence consists of a heavy-duty casting riding on a micro-polished solid steel bar. On the backside of the casting is a small adjustable wheel to make sideways movement a breeze. The rip fence is outfitted with a micro adjustment for fine-tuning; simply lock it in place and adjust fence incrementally.
Scoring blade adjustment is done with a T-handle through the cast iron table top. From here you can make both vertical and lateral adjustments in no time.
The P12|4 is equipped with two motors operating independently, putting this saw in a class all of its own.
Optional steel table is available to mount on the out-feed side of the saw for added support. The P12|4 is pre-drilled to accept the 12" x 32" table.
No videos found!
Submit a video!
P12|4 Pro Panelsaw
No Reviews Found
Submit a link!
This product has not been reviewed yet.
Let us know what you think.