- (1) Side Handle
- (1) D-Handle
- (1) Depth Gauge
- (1) Bit Grease
- (1) Tool Case
Unranked in Hammer Drills
Powerful 11.0 AMP motor; 1,350-2,750 BPM to handle the most demanding applications
Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
Soft start suppresses start-up reaction for more control and better accuracy
Variable speed control dial enables user to match the speed to the application for greater versatility
L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
L.E.D. power light indicates switch failure or cord damage
Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts, resulting in up to 50% more drilling efficiency
Makita Motor Advantage engineered with field core interlocking steel laminations, dual ball bearing armature and more copper commutator bars, increasing energy transfer efficiency for more power and longer tool life
Automatic brush cut-off protects commutator from damage for longer tool life
2-mode operation for "Hammering Only" or "Hammering with Rotation"
Lock-on slide switch for continuous operation ("Hammering Only" mode)
Externally accessible carbon brushes for greater serviceability
Ergonomic soft grip provides more comfort and control
16.4 ft. jobsite cord for greater versatility and instant power
Accepts SDS-MAX bits
No videos found!
Submit a video!
HR4001C Hammer Drill
No Reviews Found
Submit a link!
This product has not been reviewed yet.
Let us know what you think.