Cuts up to 8-1/8 inches wide boards. Powered by 2HP continuous duty, 3,450 rpm 230V single-phase motor. 9-1/4W x 72L in. work table made of heavy cast iron is precision machined with dovetail ways for extremely smooth surface and rigidity. Easy-to-adjust tables -in-feed has a positive stop at 1/8-inch and out feed at zero; both adjust to accomodate a 1/2-inch rabbeting. Balanced cutter head is precision machined from a single piece of alloy steel and rotates at 5000rpm on permanently lubricated ball bearings.

Three HSS blades, 3-inch diameter cutterhead provides 15,000 cuts per minute. The long 5-inch by 40-inch cast iron fence provides good support through the entire cut. Fully adjustable fence with positive stops at 90 and 45 degrees left and right. Large paddle type rocker switch with lock-out feature to prevent unauthorized use. Measures 26D x 72W x 38H in. All welded steel cabinet adds rigidity and reduces vibration. 4-inch chip chute hooks up to dust collection systems. Safety push blocks; knife and fence angle setting guages are included. CSA listed.