|Min side thickness
|Max side thickness
|Min front thickness
|Max front thickness
#5 in Dovetail Machines
|by Omec Srl:
The five axis automatic milling machine with numerical control, OMEC FCN3, is designed to carry out dovetails on the front and sides of drawers. The machine can simultaneously drill the sides for the assembly of afts with pins and make holes on front pieces to assemble handles or finishing panels. The machine is equipped with two cutter units, two drilling heads to drill the sides of drawers and three drilling heads to drill the front pieces of drawers. The supply, clamping and unloading of pieces is fully automated during each cycle. The machine is also equipped with three storage containers to collect the pieces to the loaded and unloaded. Controls are provided both on the push button panel and on the control panel with numerical control. Model FNC3 is operated by a numerical control, which is programmed to guarantee maximum flexibility and allow changing, within the limits of each manufacturing cycle, the following variables:
- The dap pitch
- The dimensions of the pieces
- The dap number
- To radius variation compensation of the tools
- The dap position
- The insertion or removal of the drilling heads for the sides and front pieces of drawers
- The dap depth
- The position and depth of the holes on the sides
- The cutting speed and the tool feeding
- The position and depth of the holes on the front pieces
All adjustments are extremely easy and may be done following the machine software instructions displayed on the monitor. The machine is also equipped with a self-diagnosis system.
No Reviews Found
Submit a link!
This product has not been reviewed yet.
Let us know what you think.