The motorised rip fence is the highlight of this package. Since the rip fence is controlled directly from the central operating position, there's no need to run round to the other side of the machine and back – so it saves you time. Enter the cutting width using the keypad on the control panel on the machine frame, press the start button, and the rip fence will set itself automatically to within +/- 1/10 mm (absolutely accurate – no need to check again). The VARIO drive is also very user-friendly. Using a keypad from the same operating position, you can choose any speed between 2 000 and 6 000 rpm. The colour LCD screen clearly displays the settings chosen. And just so you can size large panels in greater safety and comfort, on/off switches have been fitted to the sliding table.