:

The fully automatic finger joint production line complete with the SFJ-610 RIGHT HAND SHAPER, SFJ-610G LEFT HAND SHAPER and SFJ-4500C ASSEMBLER to produce the mass finger joint stocks.

The SFJ-610 performs end trimming and shaping functions on right end of sticks.

The SFJ-610G performs end trimming shaping & gluing functions on left end of sticks.

The two trim saw are fitted with one saw blade for cut even end of stick, and one blade for tip break ensures a great jointing result.

Air-operated clamp comes down to hold sticks firmly in place. After work piece is clamped, table start to feed, performs trimming, shaping operations.

The sharper spindle is precision-constructed for cutting finger shapes accurately and accommodates a maximum cutter diameter up to 6".

The spindle height adjustment is displayed on a dial readout gauge for easy adjustment.

The table travels on a precision linear motion guide.

The table traverse is driven by hydraulic power system, ensuring very stable, smooth work piece feeding. Thus, an accurate, fine cutting result is guaranteed.

Once the SFJ-610 finish the cutting then the conveyor table will automatically transfer the sticks to SFJ-610G and come back to the start position for accept the new sticks for work right away.

On the mean time SFJ-610G is doing his work when it finish, the sticks will auto transfer for inspection then sent to SFJ-4500C for assembly press to finish the cycle.

The SFJ-4500C is a very efficient automatic machine that performs three functions, jointing of sectional sticks which have been glued, cutting the jointed sticks to desired length, final assembly is securely pressed by powerful hydraulic system, then the jointed sticks be feed out regularly.

Auto power feeder for fast feeding and auto stops at the length to be cut.

Furnished with cutting off saw as standard equipment for cutting work pieces to the length desired.

The maximum length of jointed stick is 16'. Other sizes are available on request.

The machine employs an advanced Programmable Logic Controller for easy operation and maintenance.

The machine's motion sequences are displayed by the signal Lamps for easy checking in the event of a malfunction.