With a 1100 CFM airflow capacity, a totally enclosed fan cooled permanently lubricated 1-1/2 HP 110/220 dual voltage motor, and a 11-inch precision spin-balanced impeller, the 10-105CF M1 is designed for continuous duty applications. The collector body is supported on 3 heavy-duty rods and mounted to a sturdy steel base with 4 swivel casters allowing complete mobility within the shop. The 10-105CF M1 is equipped with a heavy-duty, ultra-fine 1 micron pleated canister filter with 77.5 square feet of surface area for maximum airflow. With a 42 gallon re-usable clear plastic collector bag, and a 6-inch main inlet fitted with a dual 4-inch Y-inlet fitting, the 10-105CF M1 is ideal for collecting fine general purpose wood and composite dust, as well as wood chips, in shops where multiple machine hook-ups are required and can be used for both stationary as well as mobile applications. The main inlet is equipped with an intake screen to prevent larger pieces from jamming in the impeller. The sound rating during operation is 80-85 decibels and its overall dimensions are 38 by 31-1/2 by 71 inches. Note: The 10-105CF M1 is factory wired for 110 volt operation. Conversion for 220 volt operation should be performed by a qualified and properly licensed electrician.